Chemical environment of copper at the surface of a CuAl2 model alloy: XPS,MEIS and TEM analyses

Air‐formed oxide on a CuAl₂ model alloy is shown to be free of copper species, with copper enriching in the alloy. With thickening of the oxide by anodizing, copper enriches further to a critical concentration at which its oxidation proceeds with incorporation of Cu(II) species into the film. Such species migrate more rapidly through the film than aluminium species. Incorporation of copper species is associated with generation of oxygen gas within the film and subsequent film rupture is due to release of the gas. Reduction of Cu(II) to Cu(I) species during XPS analysis is characterized and the accelerating role of charge neutralizing is highlighted. Copyright © 2004 John Wiley & Sons, Ltd.     

New selective O-debenzylation of phenol with Mg/MeOH

Carboxylate-benzyl and nitro-benzyl groups used in phenols protection were selectively debenzylated with 3-25 equiv of Mg in methanol at room temperature. Good yields of the desired phenols were obtained within 3-10 h from a wide variety of O-(carboxylate-benzyl)- or O-(nitro-benzyl)-phenols. Selective O-debenzylation was possible in the presence of O-(carboxylate-benzyl)- or O-(nitro-benzyl)-phenols with Mg/MeOH.     

富镧混合稀土对ZL101A合金组织和机械性能的影响

研究了富镧混合稀土对ＺＬ１０１Ａ合金的铸态、固溶态、Ｔ６状态、重熔态的组织和机械性能的影响，提出了混合稀土中入量低压铸造整体车轮合理的热处理状态。     

几种杂多阴离子柱撑水滑石的合成与吸附行为

柱撑水滑石类层柱状阴离子粘土是一类新型层柱材料，由于其二维孔道结构的可调变性及潜在的择形催化性能，已引起人们的重视[1-3]．迄今，人们已合成了包括无机和有机阴离子，同多和杂多阴离子（Polyoxometalates，简称POMs）以及配合物阴离子在内的多种柱撑水滑石，其中同多和     

Formation of Bi-Sb, Bi-Sn, and Bi-Sb-Sn Nanoclusters in Silica Xerogel Matrices from Mixed-Metal Oxide Precursors

Homogeneous mixed-metal oxides of the general formula (Bi/E/Si)O _x , where E represents a dopant element (E=Sb, Sn, or Sb/Sn), can be prepared using typical sol-gel processing techniques. Reduction of the in-situ Bi(III) and E ions by hydrogen affords nanocomposites of Bi-Sb, Bi-Sn, or Bi-Sb-Sn widely dispersed throughout the silica xerogel matrix. The materials prepared have high Bi-E metal loading of 52–60 wt. % containing Bi-E alloy nanoclusters of 12–15 nm average diameter. These results demonstrate a convenient method for the production of practical quantities of nanostructured bismuth alloy ceramic composites at high metal content.     

锆系Laves相储氢合金电极的性能研究

Ｚｒ（Ｖ０．２Ｍｎ０．２Ｍｏ０．０６Ｎｉ０．５４）２．４合金经ＨＦ溶液处理后，合金表面由富Ｚｒ和富Ｍｎ层转变成富Ｎｉ层，从而使电极初期活化周期明显缩短，电极表面氢吸附性能改善。表面反应电阻减小。本文探讨了上述电极表面反应机理，即表面Ｎｉ的催化、氢吸附和氢转移机理，对阻抗谱进行拟合，给出了相应的电极反应等效电路。     

Molten salt synthesis (MSS) of Cu2Mo6S8—New way for large-scale production of Chevrel phases

The Chevrel phase (CP), Mo₆S₈, was found to be an excellent cathode material for rechargeable magnesium batteries. Mo₆S₈ is obtained by a leaching process of Cu₂Mo₆S₈, which removes the copper. A new method of Cu₂Mo₆S₈ production was developed. In contrast to the well-known solid-state synthesis of CP, the method is based on the reaction in a molten salt media (KCl). A fast kinetics of this reaction allows using less active, but more convenient precursors (sulfides instead of sulfur), decreasing temperature and synthesis duration, as well as operation in the inert atmosphere instead of dynamic evacuated systems. It was shown that the composition and the electrochemical behavior of the products obtained by MSS and by the solid-state synthesis are identical. Thus, the molten salt method is extremely attractive for the large-scale production of the active materials for Mg batteries.     

高分子合金分离膜材料及结构研究进展

膜材料液相共混制备高分子合金分离膜不但可以调节膜材料与被分离物的亲和性，也在一定程度上改变了膜的结构。本文介绍高分子材料浓相共混对膜材料的亲水性、耐污染性及其它理化性能的影响和对膜结构的调节作用，同时指出高分子材料间的相容性是影响合金膜结构的重要因素。     

X-射线荧光光谱法测定钛铁中的硅、锰、磷、铝

介绍用X-射线荧光光谱仪测定钛铁中Si、Mn、P、Al含量的方法,通过试验确定了合适的研磨时间、压力和保压时间,用压片法制样,建立了各元素的工作曲线,各元素的测定范围分别为Si3.00%～6.00%,Mn1.00%～3.00%,P0.030%～0.070%,Al5.00%～9.00%。通过强度测量得到测定Si、Mn、P、Al的相对标准偏差分别为0.074%、0.308%、0.383%、0.040%,精密度满足测试要求。将该方法测定结果与化学法比对,准确度满足国家标准方法分析误差的要求。     

镁及镁合金中微量磷的测定方法研究

磷与钼酸铵形成磷钼杂多酸络幌物,用乙酸丁酯萃取分离,用SnCl2还原反萃取后借磷钼蓝光度法测定镁及镁合金中微量磷。在波长700 nm处工作曲线线性范围0~1.5μg/mL,相关系数为0.9995,络合物表观摩尔吸光系数ε=1.45×104L.mol-1.cm-1,相对标准偏差在1.40%~3.10%之间,加标回收率在99.3%~101.0%之间,本法与ICP法相对照结果比较满意。